Print Inspection System With Camera

It is a system that enables the quality of the printing flowing in the printing machines to be checked instantly with the photos taken.

The most important feature of the system is that, thanks to the “encoder” connected to the boiler where the printing die is located, the same location of the printed product can be displayed each time. The position displayed (forward-backward) can be changed using the detected encoder information. With the offset value to be given to the boiler value, the image can be shifted step by step each time.

The system has motorized and non-motorized models. The advantage of the motorized model is that the viewing position can be shifted to the right and left. It is a preferred model for large size prints.

Features of the motorized system:

• High resolution step capacity
• Moving left and right
• Right-to-left automatic scanning function
• Ability to go to home (start) position with one click
• Home (starting) position can be adjusted to the desired point

The imaging process is provided by the monitor connected to the PC in the system. The system can be controlled via this PC or it can be made with a mechanical button control unit that operates in parallel and is externally connected.

The printing speed that can be displayed can be up to 1000 m/ min depending on the camera preferred in the system. Also, depending on the preferred camera, the image resolution may vary.

Various actions can be performed on the image (rotation, mirroring, etc.) with the PC or external control unit.

Print Inspection System With Camera yazısı ilk önce Mertech Electronics A.Ş üzerinde ortaya çıktı.

Cooking Machine Electronic Control System

It is a machine that provides cooking with “Sous Vide” (vacuum cooking) method. The most important feature of this method is that the temperature of the cooking environment has an accuracy of +/- 0.1 degrees and the machine can maintain it.

Thanks to the high capacity heater it has, the machine can bring the temperature of the water in the container it is placed to the desired level very quickly and very balancedly with the ‘PID’ method. It has a stirring motor for even heat distribution, which is a requirement of the Sous Vide method.

There is a counter that can be adjusted both forwards and backwards to be used during cooking.

When it reaches the desired temperature and it is set, an audible warning can be given when the countdown timer is over.

The control system has 5 mechanical buttons, 8-digit light indicators in two groups of four and 6 information LEDs.

The machine gives 5 errors and 1 warning notification:

• Water level error
• Temperature sensor error
• Heater thermal error
• Heater current error
• Mixer motor current error
• Warning during heating or cooking, which occurs if the power supply is interrupted and when the appliance is switched on again (the remaining operation is continued)

Driving of the heater and the motor is provided with semiconductor elements on the electronic equipment and no mechanical drive elements are used.

Cooking Machine Electronic Control System yazısı ilk önce Mertech Electronics A.Ş üzerinde ortaya çıktı.

Chocolate Tempering Machine Electronic Control System

It is a machine that transforms the solid chocolate put into the boiler into a solution, and fills it into molds of the desired size with the help of a tap.

The process starts with the melting of the chocolate placed in the pot with the help of base and side heaters and mixer. The working point of the heaters is provided by an advanced PID algorithm, which is created according to the adjustable temperature value. The chocolate, which is brought to the desired temperature that will ensure fluidity, becomes able to flow from the tap thanks to the pump mechanism.

The column with the pump mechanism has two heaters to ensure the flowability of the chocolate. The working point of these heaters in the column wall and faucet part is also adjustable and is also provided by the PID method.

All units working with PID method have a sensitivity of +/- 0.1 degrees.

Heating of the column wall is provided by heating the fluid system surrounding it. There is a recirculation pump that ensures even distribution of heating – and cooling in the future.
The most outstanding feature of this machine is that it can continuously temper. The chocolate brought to the desired fluidity and temperature can be filled into molds in a tempered manner if desired.

Tempering process is provided by cooling the liquid surrounding the column wall. There is a high capacity compressor in the system for this cooling. The temperature control point is an adjustable value and is provided by the compressor and the circulation pump operating at variable times.

The electronic hardware and software that ensures the operation of the whole mechanism minimizes the time to reach the temperature control point by analyzing the heating and cooling curves.

Monitoring and management of all these processes of the machine can be provided with the control unit on it. There are two types of control units, mechanical and touch. The mechanical control unit has mechanical buttons and the touch control unit has capacitive touch buttons. Both units have a three-digit two-light indicator.

The touch control unit is located on a mirrored glass. The mirrored glass allows the control unit to be hidden when it is not running. In the operating state, the button positions are indicated with light and thanks to this illumination, only usable buttons appear and user guidance is provided.

The machine is available in three-phase and single-phase mains voltage models. Mains voltage is only binding mixer motor and pump motor.

The machine has many error detection devices. Connection errors of all temperature sensors can be detected. The connection problem and overcurrent of both motors, the main supply phase sequence and phase deficiency can be detected in the three-phase model. Working time is recorded and service time reminder can be made if desired.

The driving of all units on the machine is provided with semiconductor elements on the electronic equipment and no mechanical drive elements are used.

Chocolate Tempering Machine Electronic Control System yazısı ilk önce Mertech Electronics A.Ş üzerinde ortaya çıktı.

Ambient Scenting and Odor Control System Air Flow Sensor

Ambient scenting and odor control systems normally emit odor, whether or not there is air flow in the environment, at specified time intervals. When used with this sensor, it provides a balanced working environment by operating the system in case of air flow in the environment. 

In short, the Air Flow Sensor is a product made for the AC voltage switching of the ambient scent system.

• Working voltage: 90-240VAC
• Maximum current: 1A
• Short circuit protected
• Open circuit protected
• Working Temperature: 0 ° C ~ 60 ° C
• Suitable for industrial standards

Basic Working Algorithm:

• When the air flow sensor is plugged in, firstly, the resistance on the sensor heats up for about 1-1.5 minutes and its temperature reaches an average of 60 degrees.
• If there is air flow (circulation) in the environment, the resistance temperature drops, if it drops below the specified temperature, it gives AC output and operates the ambient odor system.
• If the ambient temperature rises above the specified temperature, the AC output turns off again.

Ambient Scenting and Odor Control System Air Flow Sensor yazısı ilk önce Mertech Electronics A.Ş üzerinde ortaya çıktı.

Ambient Scenting and Odor Control Machine Electronic Control System

It is a machine that provides to spray the fragrance essence to the environment in which it is located within the determined working hours and times.

Basically, it is a machine that is obliged to operate the spraying engine inside. The device, whose working and stopping times can be adjusted, has three different time zones that can be configured individually for each day, seven days a week.

There are 4 buttons and LCD screen on the electronic control system. With electronic control system;

• Password can be assigned for device control,
• Three different language options (Turkish, English, Spanish) can be selected,
• Internal real time/date can be set,
• Working times/hours/days can be entered.

In cases where operating times are long, models with fan are available to maintain the temperature inside the device.

The spray motor and fan are driven by semiconductor elements on the electronic equipment and no mechanical drive elements are used.

Ambient Scenting and Odor Control Machine Electronic Control System yazısı ilk önce Mertech Electronics A.Ş üzerinde ortaya çıktı.

4.3″ CanBUS HMI yazısı ilk önce Mertech Electronics A.Ş üzerinde ortaya çıktı.

Remote Monitoring and Control Systems

The system receives the data from remote locations over the internet, reports and generate alarms in case of critical situations. It is equipped with digital and analog inputs, relay outputs, smoke detector and optionally GSM communication module. In addition, the system was expanded with plug-and-play sockets and digital sensors on it, allowing more data to be received. The operating system of the system is Linux and it is a product resistant to harsh conditions, designed for industrial applications.

• Supply Voltage: 10.5 – 14.4 VDC; 12 VDC
• Operating Temperature Range: -10 to +70 ℃
• Operating Humidity Range: 0 – 90% Rh
• Temperature Measuring Range: -10 to +65
• Humidity Measuring Range: 0 – 85% Rh
• Contact: 4 inputs
• Relay: 2 outputs
• Ethernet: 1
• Digital Sensor: 4 inputs
• Smoke Detector: 1 input

Remote Monitoring and Control Systems yazısı ilk önce Mertech Electronics A.Ş üzerinde ortaya çıktı.

Smart Battery Management System

Octoopi is a smart energy and group battery management system developed on OctopusBrain* technology. Octoopi Smart Energy products have been developed with OctopusBrainTM technology, which ensures that each battery in the battery groups used in boats (which are mostly connected in parallel in conventional systems) are automatically and sequentially charged, consumed and managed in the same way.

Octoopi is a system consisting of IoT gateway, battery and source connection module, battery monitor and battery sensors.

With a system, 4 (service) + 1 (start) battery groups on the boat can be managed.

Octoopi Smart IoT Gateway

Octoopi Smart IoT Gateway is the main module that controls all of Octoopi Watch, Hub and Sense products.

It is used as an IoT gateway to the internet with its built-in Wi-Fi feature.

In this way, all Octoopi Smart Energy products can be monitored and managed remotely via mobile applications.

It will work in harmony with both current products and Octoopi Smart Energy products that will be released later.

Octoopi Hub Battery and Source Connection Module

Octoopi Hub is the main module to which all batteries and sources in the system are connected. It has 5 battery and sensor inputs, 4 service batteries and 1 start battery. It has 4 different source inputs namely charger, alternator, solar panel and wind turbine and 1 load output.

Technical Features

• Weight : 3.2 kg
• Size (WxDxH) : 320 x 75 x 220 mm
• Battery Inputs : 4 servis + 1 start
• Maximum Current : 300A
• Supply Voltage : 4-32V
• Battery Voltage : 12V or 24V
• Power Consumption (Awake) : < 3W (tipik)
• Current Consumption (Sleep Mode) : < 1mA
• Operating Temperature : -30°C ≤ T ≤ 85°C
• Electrical Standards : EMC: Emission EN-IEC 61000-6-3
  EMC: Immunity EN-IEC 61000-6-1
  LVD: EN 60335-1

Octoopi Watch Smart Battery Monitor

It is the smart screen where voltage, current, battery health (SoH) and charge level (SoC), charge / discharge times and alert messages can be followed monitored for each battery. Used with Octoopi Sense Battery Sensor and Octoopi Smart IoT Gateway.

• Slim and stylish design
• 4.3” color touch screen
• Error message notifications, audible and video alerts
• Ability to activate and deactivate batteries manually
• Flush and surface mounting options

Technical Features

• Weight : 125 g
• Size (WxDxH) : 177 x 88 x 14 mm
• Screen Size : 4.3″
• Supply Voltage : 4-32V
• Current Consumption (Awake) : < 200mA
• Current Consumption (Sleep Mode) : < 5mA
• Operating Temperature : -30°C ≤ T ≤ 85°C
• Electrical Standards : EMC: Emission EN-IEC 61000-6-3
  EMC: Immunity EN-IEC 61000-6-1
  LVD: EN 60335-1

Octoopi Sense Battery Sensor

The battery sensor continuously measures data such as voltage, current, battery health (SoH), charge level (SoC), charge / discharge time of the battery to which it is connected.

• Measured values are monitored via Octoopi Watch Smart Battery Monitor.
• It can be used with AGM, gel and floaded type batteries.
• Can also be used with the Octoopi smart app.

Technical Features

• Weight : 110 g
• Size (WxDxH) : 114 x 84 x 27 mm
• Supply Voltage : 6-32V
• Current Consumption (Awake) : < 15mA
• Current Consumption (Sleep Mode) : < 200µA
• Maximum Current : +- 1500 A (3s)
• Electrical Standarts : EMC: Emission EN-IEC 61000-6-3
  EMC: Immunity EN-IEC 61000-6-1
  LVD: EN 60335-1

Octoopi App

Octoopi App is a smart mobile app where the voltage, current, battery health (SoH), and charge level (SoC) and alert messages for each battery can be monitored as with the Octoopi Watch smart battery monitor.

• IOS and Android mobile app
• Monitoring the battery status of your boat anytime, anywhere in the world
• Information and alerts about SoC and SoH status of the batteries
• Information and alerts about daily use
• Ability to activate and deactivate batteries manually

Smart Battery Management System yazısı ilk önce Mertech Electronics A.Ş üzerinde ortaya çıktı.

Smart Battery Monitoring System

Octoopi Smart Battery Monitoring System has an important role, as a smart energy and battery monitoring system, among Octoopi Smart Energy products.

It is a system consisting of battery monitor, IoT gateway and battery sensors.

It is necessary to use a battery sensor for each battery to be monitored in the system, and all the batteries can be monitored on the same battery monitor.

Octoopi Watch Smart Battery Monitor

It is the smart screen where voltage, current, battery health (SoH) and charge level (SoC), charge / discharge times and alert messages can be monitored for each battery. Used with Octoopi Sense Battery Sensor and Octoopi Smart IoT Gateway.

• Slim and stylish design
• 4.3” color touch screen
• Error message notifications, audible and video alerts
• Ability to activate and deactivate batteries manually
• Flush and surface mounting options

Technical Features

• Weight : 125 g
• Size (WxDxH) : 177 x 88 x 14 mm
• Screen Size : 4.3″
• Supply Voltage : 4-32V
• Current Consumption (Awake) : < 200mA
• Current Consumption (Sleep Mode): : < 5mA
• Operating Temperature : -30°C ≤ T ≤ 85°C
• Electrical Standards : EMC: Emission EN-IEC 61000-6-3
  EMC: Immunity EN-IEC 61000-6-1
  LVD: EN 60335-1

Octoopi Sense Battery Sensor

The battery sensor continuously measures data such as voltage, current, battery health (SoH), charge level (SoC), charge / discharge time of the battery to which it is connected.

• Measured values are monitored via Octoopi Watch Smart Battery Monitor.
• It can be used with AGM, gel and floaded type batteries.
• Can also be used with the Octoopi smart app.

Technical Features

• Weight : 110 g
• Size (WxDxH) : 114 x 84 x 27 mm
• Supply Voltage : 6-32V
• Current Consumption (Awake) : < 15mA
• Current Consumption (Sleep Mode) : < 200µA
• Maximum Current : +- 1500 A (3s)
• Electrical Standarts : EMC: Emission EN-IEC 61000-6-3
  EMC: Immunity EN-IEC 61000-6-1
  LVD: EN 60335-1

Octoopi Smart IoT Gateway

Octoopi Smart IoT Gateway is the main module that controls all of Octoopi Watch, Hub and Sense products.

It is used as an IoT gateway to the internet with its built-in Wi-Fi feature.

In this way, all Octoopi Smart Energy products can be monitored and managed remotely via mobile applications.

It will work in harmony with both current products and Octoopi Smart Energy products that will be released later.

Octoopi App

Octoopi App is a smart mobile app where the voltage, current, battery health (SoH), and charge level (SoC) and alert messages for each battery can be monitored as with the Octoopi Watch smart battery monitor.

• IOS and Android mobile app
• Monitoring the battery status of your boat anytime, anywhere in the world
• Information and alerts about SoC and SoH status of the batteries
• Information and alerts about daily use
• Ability to activate and deactivate batteries manually

Smart Battery Monitoring System yazısı ilk önce Mertech Electronics A.Ş üzerinde ortaya çıktı.

Vehicle Usb Charger Units

It is an automotive standard product developed for the in-car charging needs of new generation smartphones. It has two models, single output and double outputs.

Single Output Charger

A single smartphone can be charged at the same time.

• Working Voltage: 9VDC-16VDC
• Output Voltage: 5VDC
• Input Current: 12VDC / 1.25A
• Output Current: 2.5A max
• Output Short Circuit Protected
• Fuse Protection at the input
• Operating Temperature: −40 ° C ~ 85 ° C

Dual Output Charger

Two smartphones can be charged at the same time.

• Working Voltage: 9-36VDC
• Output Voltage: 5VDC
• Input Current: 12VDC / 1.75A – 24VDC / 1.14A
• Output Current: 2x 1.1A
• Power Consumption: 21W
• Output Short Circuit Protected
• Fuse Protection at the inputs
• Operating Temperature: −40 ° C ~ 85 ° C

Vehicle Usb Charger Units yazısı ilk önce Mertech Electronics A.Ş üzerinde ortaya çıktı.

Land Mobile Antennas

Our land mobile antennas are designed for buses, minibuses, vans, long-distance trucks and jeeps. With our advanced navigational algorithms and high-end equipment, it provides superior performance even in challenging travel conditions.

Our land mobile antennas not only search and find the receiver, but also provide automatic locking. It detects satellite signals uninterruptedly, even in difficult areas with tall trees or structures, regardless of the surrounding environment.

Land Mobile Antennas yazısı ilk önce Mertech Electronics A.Ş üzerinde ortaya çıktı.

In-Vehicle Kitchen Control System

Our In-Vehicle Kitchen Control System is specially designed for buses and can be used in vehicles such as caravans. In this system, the refrigerator, boiler, coffee machine, sausage cooker, lighting and water tank used in the bus can be controlled via a touch LCD screen. A very advanced PID algorithm is operated in the system architecture.

• Turkish, English and German language options are available.
• The water levels of the boiler, coffee machine and sausage cooker can be monitored on the screen and directions can be made depending on the level.
• Refrigerator can be adjusted by the user to the desired value between 0 and 10 degrees.
• Low voltage, motor failure, fan, pressure, temperature and temperature sensor connection error warnings are displayed on the screen for the refrigerator.
• The water temperature in the boiler can be adjusted to the desired value in the range of 30 to 85 degrees.
• Water filling valve is open for boiler, water level is insufficient, temperature sensor connection, thermal and resistance error warnings are displayed on the screen.
• The coffee machine can be easily managed with the guiding buttons on the touch screen.
• Insufficient water level for the coffee machine, temperature sensor connection, thermal and resistance error warnings are displayed on the screen.
• In the sausage cooker menu, the cooking temperature can be adjusted between 30 and 85 degrees and the cooking time between 5 and 60 minutes.
• The water level is insufficient for the sausage cooker, temperature sensor connection, thermal and resistance error warnings are displayed on the screen.
• For the water tank, the water tank is empty, the level is too low, the level sensor connection error and the level sensor malfunction warnings are displayed on the screen.

In-Vehicle Kitchen Control System yazısı ilk önce Mertech Electronics A.Ş üzerinde ortaya çıktı.